joey81's CNC puzzle

Re: joey81's CNC puzzle

Unread post #221 by timber715 » Sat Jun 10, 2017 9:31 pm

Thanks for the cnc bits brad...
Image
User avatar
timber715
Admin
Admin
 
Posts: 4658
Joined: Fri Feb 24, 2012 12:47 am

Share On:

Share on Facebook Facebook Share on Twitter Twitter

Re: joey81's CNC puzzle

Unread post #222 by timber715 » Wed Jun 14, 2017 4:05 am

timber715 wrote:Thanks for the cnc bits brad...

I hope you bought plenty for yourself din, cuts aluminum like butter.
Image
User avatar
timber715
Admin
Admin
 
Posts: 4658
Joined: Fri Feb 24, 2012 12:47 am

Re: joey81's CNC puzzle

Unread post #223 by joey81 » Wed Jun 14, 2017 9:12 am

:clap: :clap:

I bought 10 pcs for me.
Rotir Tools * Bosch * Dremel * Hitachi * Dewalt * Freud * Harbor Freight * Woodpecker * Incra * Skil * Whiteside * CMT * Grizzly
User avatar
joey81
Sr. Member
Sr. Member
 
Posts: 2013
Joined: Mon Mar 05, 2012 12:05 pm

Re: joey81's CNC puzzle

Unread post #224 by joey81 » Thu Jun 15, 2017 11:06 pm

This is what happens when you forget to zero the Z axis. Fortunately, the bit survived.
Image

Image
Rotir Tools * Bosch * Dremel * Hitachi * Dewalt * Freud * Harbor Freight * Woodpecker * Incra * Skil * Whiteside * CMT * Grizzly
User avatar
joey81
Sr. Member
Sr. Member
 
Posts: 2013
Joined: Mon Mar 05, 2012 12:05 pm

Re: joey81's CNC puzzle

Unread post #225 by joey81 » Thu Jun 15, 2017 11:12 pm

You set the Z zero correctly, but forget to load the gcode file.
Image

The spindle hovered over the bolt, waiting to reach the desired RPM. Instead of plunging just 0.1mm, it dived in and tried to engrave "LinuxCNC" into the hex bolt.

First bit to be killed.
Rotir Tools * Bosch * Dremel * Hitachi * Dewalt * Freud * Harbor Freight * Woodpecker * Incra * Skil * Whiteside * CMT * Grizzly
User avatar
joey81
Sr. Member
Sr. Member
 
Posts: 2013
Joined: Mon Mar 05, 2012 12:05 pm

Re: joey81's CNC puzzle

Unread post #226 by timber715 » Thu Jun 15, 2017 11:15 pm

Its just one of those things that you have to check everytime before you run a gcode... another common thing is the starting point in the design whether it is on the center or on one corner...
Image
User avatar
timber715
Admin
Admin
 
Posts: 4658
Joined: Fri Feb 24, 2012 12:47 am

Re: joey81's CNC puzzle

Unread post #227 by timber715 » Thu Jun 15, 2017 11:16 pm

sayang naman yung bolt... :wtf:
Image
User avatar
timber715
Admin
Admin
 
Posts: 4658
Joined: Fri Feb 24, 2012 12:47 am

Re: joey81's CNC puzzle

Unread post #228 by joey81 » Fri Jun 16, 2017 10:00 pm

timber715 wrote:Its just one of those things that you have to check everytime before you run a gcode... another common thing is the starting point in the design whether it is on the center or on one corner...


"Those accidents won't happen to me, I'll be careful" is easier said than done. :crazy: :lolno:

After unscrewing the bolt (yes, the spindle unscrewed the bolt by itself) I configured LinuxCNC to load a non-existent ngc file at startup. So in case I forget to load the gcode again, LinuxCNC doesn't have anything to run.
Rotir Tools * Bosch * Dremel * Hitachi * Dewalt * Freud * Harbor Freight * Woodpecker * Incra * Skil * Whiteside * CMT * Grizzly
User avatar
joey81
Sr. Member
Sr. Member
 
Posts: 2013
Joined: Mon Mar 05, 2012 12:05 pm

Re: joey81's CNC puzzle

Unread post #229 by joey81 » Fri Jun 16, 2017 10:01 pm

Stock wider than the bed? No problem
Image
Rotir Tools * Bosch * Dremel * Hitachi * Dewalt * Freud * Harbor Freight * Woodpecker * Incra * Skil * Whiteside * CMT * Grizzly
User avatar
joey81
Sr. Member
Sr. Member
 
Posts: 2013
Joined: Mon Mar 05, 2012 12:05 pm

Re: joey81's CNC puzzle

Unread post #230 by joey81 » Sat Jun 17, 2017 7:02 pm

Mounting guide from scrap plywood
Image

Mill the cabinet door for the mount hole
Image

A couple of dabs of non-sag epoxy
Image

Clamp down the guide and drop in the handle
Image
Rotir Tools * Bosch * Dremel * Hitachi * Dewalt * Freud * Harbor Freight * Woodpecker * Incra * Skil * Whiteside * CMT * Grizzly
User avatar
joey81
Sr. Member
Sr. Member
 
Posts: 2013
Joined: Mon Mar 05, 2012 12:05 pm

PreviousNext

Return to CNC, 3D printing, Laser cutting ...etc.



Who is online

Users browsing this forum: No registered users and 1 guest

cab1net advertisements
  • Advertisement
  • Place your adds here