Chisel Workshop

Re: Chisel Workshop

Unread post #71 by chisel » Fri Apr 13, 2018 8:55 pm

Test fit, height and bevel adjustment clearance

Image

Image

Image

Image

Image
Image
User avatar
chisel
Admin
Admin
 
Posts: 784
Joined: Thu Feb 23, 2012 10:17 am

Share On:

Share on Facebook Facebook Share on Twitter Twitter

Re: Chisel Workshop

Unread post #72 by chisel » Fri Apr 13, 2018 8:56 pm

This is where I attached the shroud 2 screws hold it down

Image
Image
User avatar
chisel
Admin
Admin
 
Posts: 784
Joined: Thu Feb 23, 2012 10:17 am

Re: Chisel Workshop

Unread post #73 by chisel » Fri Apr 13, 2018 8:56 pm

Refine the design and locate the 2 inch dust port using PVC pipe

Image

Image

And another test fit. Tilt the saw to 45 degrees making sure that I have enough clearance with the addition of dust port

Image

Image
Image
User avatar
chisel
Admin
Admin
 
Posts: 784
Joined: Thu Feb 23, 2012 10:17 am

Re: Chisel Workshop

Unread post #74 by chisel » Fri Apr 13, 2018 8:57 pm

I also made a ramp directing to the 4 inch dust port so dust that the shroud miss can easily slide and be collected on the 4 inch port.

Image

Image
Image
User avatar
chisel
Admin
Admin
 
Posts: 784
Joined: Thu Feb 23, 2012 10:17 am

Re: Chisel Workshop

Unread post #75 by chisel » Fri Apr 13, 2018 8:58 pm

With the addition of the ramp I need to modify the 4 inch dust port to accommodate the additional 2 inch hose for the shroud.

Image

Image

Image

Image
Image
User avatar
chisel
Admin
Admin
 
Posts: 784
Joined: Thu Feb 23, 2012 10:17 am

Re: Chisel Workshop

Unread post #76 by chisel » Fri Apr 13, 2018 8:58 pm

And this is what it looks outside

Image

Image
Image
User avatar
chisel
Admin
Admin
 
Posts: 784
Joined: Thu Feb 23, 2012 10:17 am

Re: Chisel Workshop

Unread post #77 by chisel » Fri Apr 13, 2018 8:59 pm

How it looks inside

Image

Image

Image

Image
Image
User avatar
chisel
Admin
Admin
 
Posts: 784
Joined: Thu Feb 23, 2012 10:17 am

Re: Chisel Workshop

Unread post #78 by chisel » Fri Apr 13, 2018 9:01 pm

Assemble the saw and making sure it is level to the ground

Image

Image
Image
User avatar
chisel
Admin
Admin
 
Posts: 784
Joined: Thu Feb 23, 2012 10:17 am

Re: Chisel Workshop

Unread post #79 by timber715 » Sat Apr 14, 2018 1:05 am

ang ganda naman ng Stabila level mo... san mo nakuha yan?
User avatar
timber715
Admin
Admin
 
Posts: 4769
Joined: Fri Feb 24, 2012 12:47 am

Re: Chisel Workshop

Unread post #80 by chisel » Wed Apr 25, 2018 4:31 pm

New shop tool arrived last Saturday April 21, 2018

Image

Image

Image

Was planning to buy this

Image

But bought this model instead as this is much versatile to the job I need
Image
User avatar
chisel
Admin
Admin
 
Posts: 784
Joined: Thu Feb 23, 2012 10:17 am

PreviousNext

Return to Members Shop



Who is online

Users browsing this forum: No registered users and 1 guest

cab1net advertisements
  • Advertisement
  • Place your adds here