Sanding sealer under poly?

Since some finishing procedures are common between wood and metals, this forum is created for just that. Includes preparation, painting, finishing, etc.

Re: Sanding sealer under poly?

Unread post #11 by timber715 » Fri Mar 17, 2017 12:44 am

mama, pahinga ka muna konti.... :shifty:
User avatar
timber715
Admin
Admin
 
Posts: 4765
Joined: Fri Feb 24, 2012 12:47 am

Share On:

Share on Facebook Facebook Share on Twitter Twitter

Re: Sanding sealer under poly?

Unread post #12 by JojoD818 » Fri Mar 17, 2017 9:36 am

timber715 wrote:mama, pahinga ka muna konti.... :shifty:



I wish I can brader. I'm bleeding Pesoses as it is, pag nagpahinga ako baka mag tunganga na lang mga tao ko hahaha. Masarap na mahirap ang logistics ng materials pero I love the rush brad. Kailangan ready lagi materials para continuous may ginagawa ang tao.
User avatar
JojoD818
Sr. Member
Sr. Member
 
Posts: 584
Joined: Sat Nov 30, 2013 7:50 pm

Re: Sanding sealer under poly?

Unread post #13 by JojoD818 » Fri Mar 17, 2017 10:53 am

My wife chose this for the main door and back door.

Image

And these for the bedroom doors and bathroom.

Image

The main door and back door she wants in deep red while the bedroom doors a combination of black and cherry. Women sure knows how to give men tough challenges!

I haven't bought them yet, giving her ample time to rethink. :lolno:
User avatar
JojoD818
Sr. Member
Sr. Member
 
Posts: 584
Joined: Sat Nov 30, 2013 7:50 pm

Re: Sanding sealer under poly?

Unread post #14 by timber715 » Fri Mar 17, 2017 12:26 pm

I saw a nice video sa youtube of how to stain a nice deep red mahogany. Will post it when I find the time. Super busy rin and I always make my deadlines.
User avatar
timber715
Admin
Admin
 
Posts: 4765
Joined: Fri Feb 24, 2012 12:47 am

Re: Sanding sealer under poly?

Unread post #15 by JojoD818 » Fri Mar 17, 2017 1:04 pm

timber715 wrote:I saw a nice video sa youtube of how to stain a nice deep red mahogany. Will post it when I find the time. Super busy rin and I always make my deadlines.



Please do brader. Though I probably have watched most (if not all) videos in youtube with regards to red mahogany stain, some I even download for easy playback on my tablet.
User avatar
JojoD818
Sr. Member
Sr. Member
 
Posts: 584
Joined: Sat Nov 30, 2013 7:50 pm

Re: Sanding sealer under poly?

Unread post #16 by Ricky » Sat Mar 18, 2017 1:39 pm

Jojo yes delays cause money. Dyan nauubos yun margin pag tunganga lang bec of stopage .

Also sa door hanap ka ng maganda brand , yun nabili ko anderson na kd daw pero naka ilang galaw na. Laki liit at nag crack pa. Well sealed pa yon. Dapat yata paliguan ng sanding sealer talaga as in babad tapos saka i-poly coat.
User avatar
Ricky
Sr. Member
Sr. Member
 
Posts: 1112
Joined: Mon Mar 05, 2012 1:32 pm

Re: Sanding sealer under poly?

Unread post #17 by bigfoot » Sat Mar 18, 2017 2:12 pm

Oks daw doors ng Sunrise as per Ernie.
Your cutting tools is only as good as your sharpening system.
User avatar
bigfoot
Admin
Admin
 
Posts: 1934
Joined: Fri Feb 24, 2012 1:01 am

Re: Sanding sealer under poly?

Unread post #18 by Ricky » Sun Mar 19, 2017 10:11 am

Thanks bf and ernie.
User avatar
Ricky
Sr. Member
Sr. Member
 
Posts: 1112
Joined: Mon Mar 05, 2012 1:32 pm

Re: Sanding sealer under poly?

Unread post #19 by JojoD818 » Sun Mar 19, 2017 11:26 am

Ricky wrote:Jojo yes delays cause money. Dyan nauubos yun margin pag tunganga lang bec of stopage .

Also sa door hanap ka ng maganda brand , yun nabili ko anderson na kd daw pero naka ilang galaw na. Laki liit at nag crack pa. Well sealed pa yon. Dapat yata paliguan ng sanding sealer talaga as in babad tapos saka i-poly coat.



Ricky, so far my past experience in construction has been paying off. Nababasa ko na which material is needed next kaya naisasama ko na sa planning ko. Nakakainis kasi dati magsasabi ang tao na wala na semento or buhangin kapag talagang wala na, sana man lang yun bago pa maubos magsabi na para pag deliver mag aabot pa dun sa unang stock.

Ok will do that, the salesman at Wilcon says the doors we are going to order are bestsellers in their store and that buyer feedback has been great.
User avatar
JojoD818
Sr. Member
Sr. Member
 
Posts: 584
Joined: Sat Nov 30, 2013 7:50 pm

Re: Sanding sealer under poly?

Unread post #20 by JojoD818 » Sun Mar 19, 2017 11:31 am

wooden popsicle + foam + foam cutter + glue = foam brush

Image
User avatar
JojoD818
Sr. Member
Sr. Member
 
Posts: 584
Joined: Sat Nov 30, 2013 7:50 pm

PreviousNext

Return to Finishing



Who is online

Users browsing this forum: No registered users and 1 guest

cab1net advertisements
  • Advertisement
  • Place your adds here