drilling granite and cement

Since some finishing procedures are common between wood and metals, this forum is created for just that. Includes preparation, painting, finishing, etc.

drilling granite and cement

Unread post #1 by AC5881 » Thu Aug 20, 2015 1:36 pm

dont know what topic to put this on..
but i want to dril what looks like 1/2" to 3/4" of granite and around 3" of concrete.. daanan lang po ng hose ng lpg..

pwede po ba gamitan ng 3/4" masonry bit? ano po brand ok? irwin? thanks

pwede ba mag hammermode? takot ako mabasag granite.. hehe thanks
Random avatar
AC5881
Registered Member
Registered Member
 
Posts: 179
Joined: Mon Mar 05, 2012 3:27 am

Share On:

Share on Facebook Facebook Share on Twitter Twitter

Re: drilling granite and cement

Unread post #2 by AC5881 » Thu Aug 20, 2015 1:38 pm

http://www.ebay.com/itm/Vermont-America ... 5afdd4394d

ok po kaya itong vermont? para medyo mahaba? pwede din pang tagos ng wires sa pader...

ito lang kasi yung irwin na nakita ko similar price.. maikli

http://www.ebay.com/itm/Irwin-3-4-Tungs ... 43e111fcfb
Random avatar
AC5881
Registered Member
Registered Member
 
Posts: 179
Joined: Mon Mar 05, 2012 3:27 am

Re: drilling granite and cement

Unread post #3 by joey81 » Thu Aug 20, 2015 2:04 pm

I know Panda has those long masonry bits. They also have diamond hole saws for granite.
Give them a visit. And bring extra money, I have a feeling hindi lang drill bits and hole saw ang mabibili mo. :crazy:
Rotir Tools * Bosch * Dremel * Hitachi * Dewalt * Freud * Harbor Freight * Woodpecker * Incra * Skil * Whiteside * CMT * Grizzly
User avatar
joey81
Sr. Member
Sr. Member
 
Posts: 2132
Joined: Mon Mar 05, 2012 12:05 pm

Re: drilling granite and cement

Unread post #4 by AC5881 » Thu Aug 20, 2015 2:28 pm

thank you sir joey... hehe
confident ako di ako madali mapabili ng hindi ko hinahanap.... hahaha

i hope im right pagdaan ko.. hehe thanks panda is at dasmarinas po? near quintin paredes?

btw medyo nagtitipid ako.. and the holes dont have to be perfect naman... hindi po gagana pag masonry lang lahat? hehe natakot lang ako mabasag e.. pag ijackhammer yung granite.. hehe

thanks
Random avatar
AC5881
Registered Member
Registered Member
 
Posts: 179
Joined: Mon Mar 05, 2012 3:27 am

Re: drilling granite and cement

Unread post #5 by timber715 » Thu Aug 20, 2015 6:32 pm

AC5881 wrote:thank you sir joey... hehe
confident ako di ako madali mapabili ng hindi ko hinahanap.... hahaha

i hope im right pagdaan ko.. hehe thanks panda is at dasmarinas po? near quintin paredes?

btw medyo nagtitipid ako.. and the holes dont have to be perfect naman... hindi po gagana pag masonry lang lahat? hehe natakot lang ako mabasag e.. pag ijackhammer yung granite.. hehe

thanks

You are correct.... Baka nga mabasag. Do not use hammer mode and wet cut when possible.
User avatar
timber715
Admin
Admin
 
Posts: 4804
Joined: Fri Feb 24, 2012 12:47 am

Re: drilling granite and cement

Unread post #6 by bryant77 » Thu Aug 20, 2015 9:34 pm

For granite you need diamond hole saw. Price of hole saw depends on the sizes. Im using 35mm which I bought for P1500. Ginagamit ko sa mga granite countertop para sa butas na daanan ng flexible hose ng faucet. Wet cutting method para hindi mag-init yun diamond tip.

Then for concrete I'm using a rotary hammer & sds plus masonry drill bit around 3/4" size.
Random avatar
bryant77
Jr Member
Jr Member
 
Posts: 436
Joined: Sat Mar 03, 2012 8:43 pm
Location: Quezon City, Philippines

Re: drilling granite and cement

Unread post #7 by AC5881 » Wed Aug 26, 2015 2:53 pm

thank you sir timber
thank you sir bryant. di pala basta basta.. akala ko dril dril lang.. hehe thanks...
Random avatar
AC5881
Registered Member
Registered Member
 
Posts: 179
Joined: Mon Mar 05, 2012 3:27 am


Return to Finishing



Who is online

Users browsing this forum: No registered users and 1 guest

cab1net advertisements
  • Advertisement
  • Place your adds here