How to: Magnetic Switch Installation

All about electrical and electronics.

How to: Magnetic Switch Installation

Unread post #1 by Violaine » Sun Dec 07, 2014 6:00 pm

Help naman mga brothers!

I got myself a Fuji brand magnetic switch which I intend to replace the simple on off Omni switch that my jointer came with.
Its motor is a china made induction motor 3HP, single phase.

Now I plan to put this type of magentic switch:

Front panel
Image

The internals (whole pic)
Image

I enlarged the top portion of the "internals" group of wiring
Image

and here is the bottom half
Image

here is the side view of the wiring diagram
Image

if you need more pictures, let me know I will take some more.

thanks in advance mga peeps!

:angel:
I think i was a woodworker in my previous life...and the life previous to that.
User avatar
Violaine
Sr. Member
Sr. Member
 
Posts: 3011
Joined: Sat Mar 03, 2012 10:06 pm

Share On:

Share on Facebook Facebook Share on Twitter Twitter

Re: How to: Magnetic Switch Installation

Unread post #2 by timber715 » Sun Dec 07, 2014 6:18 pm

yung positive input brader ikabit mo lang dun tapos yung ground naman malapit dun sa isa... :shifty: kayang kaya mo yan brad, good luck :shifty:
User avatar
timber715
Admin
Admin
 
Posts: 4764
Joined: Fri Feb 24, 2012 12:47 am

Re: How to: Magnetic Switch Installation

Unread post #3 by Joey » Sun Dec 07, 2014 6:21 pm

timber715 wrote:yung positive input brader ikabit mo lang dun tapos yung ground naman malapit dun sa isa... :shifty: kayang kaya mo yan brad, good luck :shifty:



Tama! Pag sumabog, happy new year! :lolno:

Kidding aside, pede ba yan eh pang 3 phase yan? Noob here...
AEG*B&D*Bosch*Craftsman*Delta*Festool*Freud*Incra*Leigh*Makita*Ryobi*Triton*Woodcraft
Laguna*Grizzly*Milwaukee*Kikukawa*Amada*Hitachi*SLT
User avatar
Joey
Moderators
Moderators
 
Posts: 719
Joined: Sun Mar 04, 2012 7:01 am
Location: Makati city

Re: How to: Magnetic Switch Installation

Unread post #4 by Violaine » Sun Dec 07, 2014 6:29 pm

ganyang ganyan din kasi yung nakalagay sa table saw ko eh (single phase motor 3HP wired to 220V)..kaya binili ko...hehehe..dadalin ko nalang sa Dec 13 to be sure...
I think i was a woodworker in my previous life...and the life previous to that.
User avatar
Violaine
Sr. Member
Sr. Member
 
Posts: 3011
Joined: Sat Mar 03, 2012 10:06 pm

Re: How to: Magnetic Switch Installation

Unread post #5 by nick » Sun Dec 07, 2014 6:35 pm

Nakagamit na ako ng magnetic switch... pero yung setup ko meron syang push button for On and OFF. pano set up mo nyan? kung meron kang schematic mas maganda para makita natin yung coil kung anong terminal sya.
User avatar
nick
Registered Member
Registered Member
 
Posts: 188
Joined: Sun Jul 20, 2014 11:42 pm

Re: How to: Magnetic Switch Installation

Unread post #6 by Joey » Sun Dec 07, 2014 6:37 pm

Violaine wrote:ganyang ganyan din kasi yung nakalagay sa table saw ko eh (single phase motor 3HP wired to 220V)..kaya binili ko...hehehe..dadalin ko nalang sa Dec 13 to be sure...


Noted doc. Wag mo kalimutan yung Kapex at domino ha. Magdadala na ako ng cash para dyan... Seriously! :thumbup:
AEG*B&D*Bosch*Craftsman*Delta*Festool*Freud*Incra*Leigh*Makita*Ryobi*Triton*Woodcraft
Laguna*Grizzly*Milwaukee*Kikukawa*Amada*Hitachi*SLT
User avatar
Joey
Moderators
Moderators
 
Posts: 719
Joined: Sun Mar 04, 2012 7:01 am
Location: Makati city

Re: How to: Magnetic Switch Installation

Unread post #7 by Violaine » Sun Dec 07, 2014 6:55 pm

hindi ba me domino ka na..si Godzilla? :clap:
I think i was a woodworker in my previous life...and the life previous to that.
User avatar
Violaine
Sr. Member
Sr. Member
 
Posts: 3011
Joined: Sat Mar 03, 2012 10:06 pm

Re: How to: Magnetic Switch Installation

Unread post #8 by timber715 » Sun Dec 07, 2014 6:57 pm

Violaine wrote:hindi ba me domino ka na..si Godzilla? :clap:

importante doc yung Kapex.... dalin mo na rin daw yung domino.... laro tayo. :think:
User avatar
timber715
Admin
Admin
 
Posts: 4764
Joined: Fri Feb 24, 2012 12:47 am

Re: How to: Magnetic Switch Installation

Unread post #9 by Violaine » Sun Dec 07, 2014 6:59 pm

@nick,

bro...simple lang naiiisip ko...yung dalawang wire galing sa motor (3Horsepower single phase) eh iko connect ko jan sa magnetic switch na yan...

kaso dko alam kung pano at san ko kokonek yung 2 wires na yun....

(btw..as the label implies...sabi kasi no bro joey...pang 3phase itong magnetic switch na ito?...because it says in the label?..pede kaya ito sa iniisip ko?)...anyway kung d pede, eh yun na lang dati...800 petot din setback ko..2nd hand kasi ito..)

will post shortly the wiring diagram...tks!
I think i was a woodworker in my previous life...and the life previous to that.
User avatar
Violaine
Sr. Member
Sr. Member
 
Posts: 3011
Joined: Sat Mar 03, 2012 10:06 pm

Re: How to: Magnetic Switch Installation

Unread post #10 by Violaine » Sun Dec 07, 2014 7:01 pm

@Timb!,

dko nga ma I sync sa vacuum with tool switch kasi 220V yung vacuum tapos 110V yung kapex! hahahaha....

bakit kaya type ni Joey yung Kapex?hmmmm...

:problem:
I think i was a woodworker in my previous life...and the life previous to that.
User avatar
Violaine
Sr. Member
Sr. Member
 
Posts: 3011
Joined: Sat Mar 03, 2012 10:06 pm

Next

Return to Electricals and Electronics



Who is online

Users browsing this forum: No registered users and 1 guest

cab1net advertisements
  • Advertisement
  • Place your adds here