Belt Grinder 2x72

Re: Belt Grinder 2x72

Unread post #11 by bugel » Mon Jan 15, 2018 11:20 pm

Galing naman ni ronnel..naging mabilis at madali siguro ang pagka build nyan dahil sa new lathe mo..inggit :problem:

Pwede kayang plastic ang gamitin na roller? Like yung mga leaf spring bushing? Wala kasi ko lathe..turn ko na lang sa drill press hehe..
User avatar
bugel
Sr. Member
Sr. Member
 
Posts: 1147
Joined: Tue Aug 20, 2013 8:13 pm

Share On:

Share on Facebook Facebook Share on Twitter Twitter

Re: Belt Grinder 2x72

Unread post #12 by bigfoot » Mon Jan 15, 2018 11:25 pm

Pwede cguro, polyurethane naman ata yun. Maparaan ka naman, baka yosi lang sa machine shop nyo jan. Yung 5 inch drive roller, sa cast iron pulley ginawa. Bagay ito sa metal works mo, sabay magpanday ka na din.
Your cutting tools is only as good as your sharpening system.
User avatar
bigfoot
Admin
Admin
 
Posts: 1903
Joined: Fri Feb 24, 2012 1:01 am

Re: Belt Grinder 2x72

Unread post #13 by bugel » Mon Jan 15, 2018 11:28 pm

Ano nga pala max speed nang motor?
User avatar
bugel
Sr. Member
Sr. Member
 
Posts: 1147
Joined: Tue Aug 20, 2013 8:13 pm

Re: Belt Grinder 2x72

Unread post #14 by bigfoot » Mon Jan 15, 2018 11:46 pm

1850 rated ng motor, pero naka VFD, kaya variable. Eto good reference for the build: http://jerswoodshop.com/2x72-tilting-belt-grinder/.

Kung nagtitipid, pwede single phase, then 4 inch drive roller at 1850 rpm. Pwede din pulley system para variable speed, hindi nga lang tiltable.
Your cutting tools is only as good as your sharpening system.
User avatar
bigfoot
Admin
Admin
 
Posts: 1903
Joined: Fri Feb 24, 2012 1:01 am

Re: Belt Grinder 2x72

Unread post #15 by bugel » Tue Jan 16, 2018 12:22 am

bigfoot wrote:Pwede cguro, polyurethane naman ata yun. Maparaan ka naman, baka yosi lang sa machine shop nyo jan. Yung 5 inch drive roller, sa cast iron pulley ginawa. Bagay ito sa metal works mo, sabay magpanday ka na din.


Yung mga maliit na roller lang ang plano kong made of plastic..5" drive roller kailangan yata medyo may bigat kaya obligadong made of steel..to provide extra torque sa motor..tama ba :eh:

Matagal ko nang balak gumawa nyan..very usefull sa shop ko yan..daming jig na pwedeng gawin for metal working..
User avatar
bugel
Sr. Member
Sr. Member
 
Posts: 1147
Joined: Tue Aug 20, 2013 8:13 pm

Re: Belt Grinder 2x72

Unread post #16 by bigfoot » Thu Jan 18, 2018 9:04 pm

Yung 5 inch wheel is also to increase the motor speed. Kung pulley system ka naman, maybe no need na. Hindi lang tiltable kapag pulley system. Yung mga rollers ang mahal sa labas. Try mo p is Ronnel, baka friendly price for the rollers, parang me isa pa siyang gagawin naman ata.
Your cutting tools is only as good as your sharpening system.
User avatar
bigfoot
Admin
Admin
 
Posts: 1903
Joined: Fri Feb 24, 2012 1:01 am

Previous

Return to MetalWorking



Who is online

Users browsing this forum: No registered users and 1 guest

cab1net advertisements
  • Advertisement
  • Place your adds here