fortnapz woodworks

fortnapz woodworks

Unread post #1 by fortnapz » Sat Jun 16, 2012 9:44 am

My first major woodworks :
Image
Its a center table made out of scrap finewood(palochina). i dont have any powertools when i build this table. i just had a crosscut handsaw, chisel, hammer, a cheap scrub plane and a sanding pad. major project ko ito dahil major major na pawis ang pumatak sa akin nito.
Invented for Life Out Perform. Out Last Work. Don't play. Tools That Make a Difference Follow your instinct
i & swmbo luv my ex!
User avatar
fortnapz
Jr Member
Jr Member
 
Posts: 329
Joined: Sat Mar 03, 2012 11:36 pm

Share On:

Share on Facebook Facebook Share on Twitter Twitter

Re: fortnapz woodworks

Unread post #2 by fortnapz » Sat Jun 16, 2012 9:48 am

all parts were laid horizontally. that is no wood grain is perpendicular to the floor.
Image
Invented for Life Out Perform. Out Last Work. Don't play. Tools That Make a Difference Follow your instinct
i & swmbo luv my ex!
User avatar
fortnapz
Jr Member
Jr Member
 
Posts: 329
Joined: Sat Mar 03, 2012 11:36 pm

Re: fortnapz woodworks

Unread post #3 by fortnapz » Sat Jun 16, 2012 9:59 am

my first commissioned collapsible bed.
Image
made of NZ wood and Marine Plywood. meron na akong powertools nito.
Invented for Life Out Perform. Out Last Work. Don't play. Tools That Make a Difference Follow your instinct
i & swmbo luv my ex!
User avatar
fortnapz
Jr Member
Jr Member
 
Posts: 329
Joined: Sat Mar 03, 2012 11:36 pm

Re: fortnapz woodworks

Unread post #4 by Ricky » Sat Jun 16, 2012 11:43 am

Sa center table pala nagsimula ang lahat bro, keep it up. :clap:
User avatar
Ricky
Sr. Member
Sr. Member
 
Posts: 1113
Joined: Mon Mar 05, 2012 1:32 pm

Re: fortnapz woodworks

Unread post #5 by timber715 » Sat Jun 16, 2012 11:52 am

nice to see the bed and all the bent wood... so how did you do it? held in place by glue and nails, bent into shape before gluing, or baluktot yung wood to start with? hehehe
User avatar
timber715
Admin
Admin
 
Posts: 4770
Joined: Fri Feb 24, 2012 12:47 am

Re: fortnapz woodworks

Unread post #6 by fortnapz » Sat Jun 16, 2012 12:23 pm

timber715 wrote:nice to see the bed and all the bent wood... so how did you do it? held in place by glue and nails, bent into shape before gluing, or baluktot yung wood to start with? hehehe


hehehe... wala akong naisip na mabilis na paraan kundi, gumamit na manipis na s4S 1/2 X 2 YATA. glued plus nails the first layer. then just glue the next layer. four layer yata lahat iyan.
Image
Invented for Life Out Perform. Out Last Work. Don't play. Tools That Make a Difference Follow your instinct
i & swmbo luv my ex!
User avatar
fortnapz
Jr Member
Jr Member
 
Posts: 329
Joined: Sat Mar 03, 2012 11:36 pm

Re: fortnapz woodworks

Unread post #7 by fortnapz » Sat Jun 16, 2012 12:26 pm

Image
Invented for Life Out Perform. Out Last Work. Don't play. Tools That Make a Difference Follow your instinct
i & swmbo luv my ex!
User avatar
fortnapz
Jr Member
Jr Member
 
Posts: 329
Joined: Sat Mar 03, 2012 11:36 pm

Re: fortnapz woodworks

Unread post #8 by JayL » Sat Jun 16, 2012 2:00 pm

More more brother. Great woodworking coming soon here. :angel:
Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Cutting Tools
Bosch Power Tools
3M PPS
User avatar
JayL
Moderators
Moderators
 
Posts: 2778
Joined: Sat Mar 03, 2012 11:08 pm

Re: fortnapz woodworks

Unread post #9 by Ricky » Sat Jun 16, 2012 7:51 pm

Nice technique bro
User avatar
Ricky
Sr. Member
Sr. Member
 
Posts: 1113
Joined: Mon Mar 05, 2012 1:32 pm

Re: fortnapz woodworks

Unread post #10 by fortnapz » Wed Jun 20, 2012 8:22 pm

continuation..
nang nakakuha ako ng project: office improvement & computer Table(in volume) for maritime review center. I decided to take charge the cutting of plyboard using this one:
Image
(nagkaroon ito ng kasamaang Makita) & this one
Image
at itong nga ginawa namin:Image
hindi sya gaano kaganda at ka komplekado pero satisfied ang nagpagawa hanggang sa nagkalat ang
mga ganitong mesa sa LuzViMin.
Last edited by fortnapz on Wed Jun 20, 2012 9:20 pm, edited 1 time in total.
Invented for Life Out Perform. Out Last Work. Don't play. Tools That Make a Difference Follow your instinct
i & swmbo luv my ex!
User avatar
fortnapz
Jr Member
Jr Member
 
Posts: 329
Joined: Sat Mar 03, 2012 11:36 pm

Next

Return to Woodworking



Who is online

Users browsing this forum: No registered users and 1 guest

cab1net advertisements
  • Advertisement
  • Place your adds here