Table Saw Outfeed Table Cabinet

Re: Table Saw Outfeed Table Cabinet

Unread post #21 by timber715 » Thu Sep 20, 2018 11:34 pm

iniwan mo yung glue? matututyo yun, bakit di mo linagay yung top?
User avatar
timber715
Admin
Admin
 
Posts: 4808
Joined: Fri Feb 24, 2012 12:47 am

Share On:

Share on Facebook Facebook Share on Twitter Twitter

Re: Table Saw Outfeed Table Cabinet

Unread post #22 by chisel » Wed Oct 17, 2018 7:25 pm

Start making the leveling mechanism with the 1 ¼ forstner bit to the four legs of the cabinet

Image

W/c produces this recess.

Image

For the bolt to sit on.

Image
Image
User avatar
chisel
Admin
Admin
 
Posts: 808
Joined: Thu Feb 23, 2012 10:17 am

Re: Table Saw Outfeed Table Cabinet

Unread post #23 by chisel » Wed Oct 17, 2018 7:26 pm

Preparing to flush trim the mdf to the side using a router and a flush trim bit.

Image

Image

Image
Image
User avatar
chisel
Admin
Admin
 
Posts: 808
Joined: Thu Feb 23, 2012 10:17 am

Re: Table Saw Outfeed Table Cabinet

Unread post #24 by chisel » Wed Oct 17, 2018 7:26 pm

Then edge banding the side,

Image

Image
Image
User avatar
chisel
Admin
Admin
 
Posts: 808
Joined: Thu Feb 23, 2012 10:17 am

Re: Table Saw Outfeed Table Cabinet

Unread post #25 by chisel » Wed Oct 17, 2018 7:26 pm

To reinforce the torsion box top to the leveling mechanism I will used 1/8 sheet metal with the use of a jigsaw equipped with a metal cutting blade.

Image

These also needs to be recess on the mdf

Image

I used this jig with a pattern making bit to do the recess

Image

Image

Image
Image
User avatar
chisel
Admin
Admin
 
Posts: 808
Joined: Thu Feb 23, 2012 10:17 am

Re: Table Saw Outfeed Table Cabinet

Unread post #26 by chisel » Wed Oct 17, 2018 7:27 pm

Then round over the bottom part of the table

Image

I apply 3 coats sanding sealer to protect the mdf then install the leveling mechanism

Image

Image
Image
User avatar
chisel
Admin
Admin
 
Posts: 808
Joined: Thu Feb 23, 2012 10:17 am

Re: Table Saw Outfeed Table Cabinet

Unread post #27 by chisel » Wed Oct 17, 2018 7:27 pm

Installing the top to the base and testing the leveling mechanism

Image

Image

Image
Image
User avatar
chisel
Admin
Admin
 
Posts: 808
Joined: Thu Feb 23, 2012 10:17 am

Re: Table Saw Outfeed Table Cabinet

Unread post #28 by chisel » Wed Oct 17, 2018 7:28 pm

Leveling the outfeed table to the table saw

Image

Image


I will install formica to the table top. Before I use rugby to adhere the formica to the substrate with the use of scraper

Image
Image
User avatar
chisel
Admin
Admin
 
Posts: 808
Joined: Thu Feb 23, 2012 10:17 am

Re: Table Saw Outfeed Table Cabinet

Unread post #29 by chisel » Wed Oct 17, 2018 7:28 pm

But I really don’t like this procedure as it was messy so I try different brand of contact adhesive it is less messy because I use ordinary paint roller to apply the adhesive

Image

Image

Image
Image
User avatar
chisel
Admin
Admin
 
Posts: 808
Joined: Thu Feb 23, 2012 10:17 am

Re: Table Saw Outfeed Table Cabinet

Unread post #30 by chisel » Wed Oct 17, 2018 7:29 pm

After the glue set I prepare the positioning stick

Image

Image

With the J roller to evenly distribute the pressure between the mdf to the formica for proper material bonding

Image

Image
Image
User avatar
chisel
Admin
Admin
 
Posts: 808
Joined: Thu Feb 23, 2012 10:17 am

PreviousNext

Return to Woodworking



Who is online

Users browsing this forum: No registered users and 2 guests

cab1net advertisements
  • Advertisement
  • Place your adds here